In this gide, we will look at Black Pearl Granite – its price, countertops, finishes and all you need to know before buying this granite to help you make the right decision.
Black Pearl Granite is a dark and fine-grained natural stone with metallic silver, brown and green flecks. It is primarily mined in India and it is popular because of its affordable price and a solid black aesthetic.
Where can I use Black Pearl Granite?
It is usually employed in kitchens, bathrooms, and exterior spaces since its neutral yet striking aesthetics blend well with most other stylistic choices, regardless of whether we are dealing with contemporary minimalism or warm, rustic buildings.
Black Pearl Granite Price
Average Market Prices (Material Cost Only)
| Country | Quality | Price per sq. ft (Polished) | Price in USD (Usd/Sqft) |
| India | Basic Quality | ₹50 – ₹80 | $0.60 – $1.00 |
| India | Premium Quality | ₹150 – ₹280 | $1.80 – $3.37 |
| USA (imported) | Mid to High Grade | – | $4.20 – $6.00 |
Note: These are material-only prices. Fabrication, edge polishing, and installation are not included in these prices.
Price Based on Thickness
The price of the black pearl granite is also dependent on the thickness of the slab. Thicker granite slabs are more powerful, heavier and also more expensive.
| Thickness | Common Use | Price (₹/sq. ft) | Price ($/sq. ft) |
| 16 mm | Backsplash , floors | ₹50 – ₹120 | $0.60 – $1.45 |
| 20 mm (Standard) | Kitchen counters, vanities | ₹100 – ₹180 | $1.20 – $2.20 |
| 30 mm | High-end counters, for outdoor use | ₹180 – ₹300 | $2.20 – $3.60 |
Thicker granite should be utilised in the kitchen countertops and outdoor uses because they are stronger and more durable.
Price Based on Size (Slab Dimensions)
The slabs are normally sold in full sizes. Larger slabs are more expensive but can be used to minimise joints and seams.
| Slab Size (ft) | Thickness | Approx. Cost (INR) | Approx. USD |
| 10 ft x 3.25 ft Cutter Slabs | 20 mm | ₹100 – ₹180 | $1.25 – $2.25 |
| 10 ft x 6 ft Gangsaw Slabs | 20 mm | ₹300 – ₹400 | $3.75 – $5 |
| 10 ft x 3.25 ft Cutter Slabs | 30 mm | ₹130 – ₹210 | $1.65 – $2.65 |
| 10 ft x 6 ft Gangsaw Slabs | 30 mm | ₹400 – ₹500 | $5 – $6.25 |
Tip: You should always request usable area in the slab (net square feet), as some portions of it may be cut off during fabrication.
What Granite Grade is Black Pearl Granite?
The granites are graded into levels according to rarity and pattern (Levels 1 and 7). Black Pearl is normally Level 12, and it is one of the cheapest high-quality granites.
Now, depending on the quality of the slab – black pearl granite can be either Grade A, B or C. here is a detailed guide to help you inspect the slabs you buy and make sure you get the right quality.
Read this article to learn more about granite grades and levels
Black Pearl Granite Countertops Cost in USA
Price Estimation by Kitchen Size
The costs include material, fabrication and installation.
Feel free to use our easy kitchen countertop cost calculator here
| Kitchen Size | Finish | Material Cost | Labor & Fabrication | Total Cost |
| 30 ft² | Polished | $1,200 – $2,100 | $1,350 – $1,800 | $2,550 – $3,900 |
| 30 ft² | Leathered | $1,950 – $3,000 | $1,350 – $1,800 | $3,300 – $4,800 |
| 50 ft² | Polished | $2,000 – $3,500 | $2,250 – $3,000 | $4,250 – $6,500 |
| 50 ft² | Leathered | $3,250 – $5,000 | $2,250 – $3,000 | $5,500 – $8,000 |
| 70 ft² | Polished | $2,800 – $4,900 | $3,150 – $4,200 | $5,950 – $9,100 |
| 70 ft² | Leathered | $4,550 – $7,000 | $3,150 – $4,200 | $7,700 – $11,200 |
Fabrication entails cutouts, edge polishing, sink cutouts and hob cutouts. The labour is based on the complexity of cities and installations.
How to Calculate the Cost of Black Pearl Granite Countertop?
It would be practical to calculate the cost of a black pearl granite countertop installation before being able to plan it. That is not only the price of granite, that is the price with fabrication, edge polishing, cutouts (sink or stove) and installation.
You can estimate it step wise as mentioned below:
Formula:
Total Cost = (Area × Granite Rate per sq. ft) + Fabrication Charges + Installation Charges + Extra Add-ons (if any)
Step-by-Step Guide:
Measure the Area
Use the formula:
Length (in feet) × Width (in feet) = Total Area in sq. ft
Example: A countertop that is 10 feet long and 2.5 feet wide → 10 × 2.5 = 25 sq. ft
Select the Finish Type
- Polished: Cheaper
- Leathered: More expensive
- Honed/Antique: Mid-range to high
Find the Granite Rate
- Based on thickness and finish
- Example: Leathered granite at ₹150/sq. ft
Estimate Material Cost
Formula:
Area × Price per sq. ft = Material Cost
Example:
25 sq. ft × $15 = $375
Add Fabrication Cost
This involves cutting, polishing of edges, sink cutouts, etc.
Typically $45 – $60 per sq. ft
Example:
25 × $55 = $1,375
Add Installation Charges
Ranges by city and complexity
Average $250 – $800 per job
Add Extra Costs (optional)
Backsplash, specially designed edges, sealing, etc.
Typically $100 – $500 per project, depending on the scope of it.
Tips
- Fabricators should always be asked to quote in detail.
- Inquire whether sealing and edge finishing are covered.
- Look to see whether slab wastage (scrap) is being charged.
Black Pearl Leathered Granite
Prices of Leathered Finish
Leathered finish generally runs $1–$2.5/sq. Ft. more than polished.
Is Leathered Black Pearl Granite Good for Countertops?
Pros:
- The textured finish is matte, adds depth, and conceals fingerprints.
- Reduces glare and is easier on the eyes.
- Brushing closes pores, which makes it less porous.
Cons:
- The slightly textured can trap crumbs; it must be cleaned thoroughly.
- Unsuitable rolling of dough or inaccurate cooking.
- Texture makes chipping edges more visible.
Use-case: Suits well in busy kitchens, islands, and outdoor bars.
Common Uses of Leathered Black Pearl Granite
Here are some common uses:
Kitchen Countertops
- Provides an elegant and advanced appearance.
- Concommands fingerprints, smudges and watermarks better than polished granite.
- Offers enhanced grip, and the chance of slipping is minimised when wet.
Bathroom Vanities
- Mould resistant and water resistant.
- Appears fancy with neutral and contemporary bathroom themes.
- Less mirrored, with a relaxing spa-like atmosphere.
Outdoor Kitchen Counters
- Resistant to heat, rain and sun.
- The texture reduces its slipperiness when wet.
Accent Walls or Backsplashes
- Brings a textured and bold visual to kitchens or living rooms.
- Sets brilliantly with white or wooden cabinets as a contrast.
Fireplace Surrounds
- The distressed detailing gives it a rustic or industrial look.
- Durable and simple to clean.
Bar Tops and Islands
- Suitable for home bars or commercial applications.
- Long lasting and can resist scratches even under hard usage.
Flooring in Low-Traffic Areas
- It may be utilised in corridors, vestibules or personal spaces.
- Non-slippery surface enhances safety, particularly in houses that have children or elderly people.
Where to Avoid Leathered Finish
High-Grease Cooking Areas
- Leathered surfaces are a bit rough in consistency, and this property can hold oil, grease, and food particles.
- This complicates the cleaning process, particularly in busy kitchens where there is much frying or the use of oil.
Outdoor Areas with Heavy Dust or Rain
- Dust may be deposited on the raised surface, and moisture may be trapped.
- Otherwise, this might cause stains, mould or discolouration with time unless it is sealed well.
Wet Zones Without Proper Sealing
- Water spots and soap scum may adhere to the uneven surface of the bathrooms or sink areas.
- Unless the granite is sealed periodically, it can absorb moisture and become dull with time.
Commercial Kitchens or High-Use Cafeterias
- The environment requires quick cleaning of surfaces.
- Leathered granite may also increase the time of cleaning, and bacteria may reside in the joints.
Kids’ Study or Activity Areas
- The rough surface does not suit writing and crafts.
- It is also more prone to getting stains, whether it is markers, glue or paint.
Tabletops or Work Desks
- Too rough to write or use a mouse comfortably.
- This may result in snagging paper and poor wiping.
Other Finishes for Black Pearl Granite
Other than the polished and the leathered finish, Black Pearl Granite can also come in other sophisticated finishes. The options have the ability to alter the texture, appearance and maintenance requirements of the stone.
Here are the main alternatives:
Honed Finish
- Appearance: Matt and smooth, soft, low-sheen surface. It provides a more natural modern appearance compared to polished granite.
- Touch: Soft to touch yet not shiny.
- Price: ₹20 to ₹50 per sq. ft, higher than polished granite.
- Maintenance:
Requires more sealing to be done to avoid stains.
Fingerprints, watermarks and smudges are easier to see.
- Use Cases: Common in bathrooms, kitchen islands, and modern areas where gloss is undesired.
Brushed Finish
- Appearance: Softly textured surface of weathered appearance. Not as coarse as leather.
- Texture: Lightly rough to the touch; provides more friction than polished or honed surfaces.
- Price: More expensive than regular polished granite by ₹30 to ₹80 per sq. ft.
- Benefits:
Provides depth in appearance without appearing completely matte.
Easier to care than honed because smudges are less noticeable.
- Use Cases: Suits best as indoor flooring, bathroom countertops, or rustic style kitchens.
Antique Finish
- Appearance: Distressed, one of a kind aged appearance achieved through brushing and tumbling. It makes the granite look weathered and old fashioned.
- Texture: Rustic and heavily textured.
- Price: Among the most costly finishes – typically ₹250 to ₹400 per sq. ft.
- Use Cases: Commonly applied in farmhouse-style homes, historical structures and ornaments on accent walls.
- Note: Not generally available; it is typically made to order.
Black Pearl Granite Slabs
Black Pearl granite can be supplied in various types of slabs and thicknesses depending on finish and usage. The most popular variants of slabs are broken down here:
Leathered Granite Slabs
- High-grade slabs of a textured and matte finish.
- It is provided in 25 -30 mm thickness, which is more durable.
Ideal for:
- Waterfall kitchen islands
- Full-height backsplashes
- Outdoor kitchen counters
Factory price: Approx. $2.40–$3.60 (USD)
Polished Slabs
- Dimensional polished slabs that have a shiny reflective finish.
- Usually, comes in 16 mm, 20 mm thick and 30mm thickness
Best for:
- Kitchen countertops
- Vanity tops
- Wall cladding
Price range:
| Slab Size (ft) | Thickness | Approx. Cost (INR) | Approx. USD |
| 10 ft x 3.25 ft Cutter Slabs | 20 mm | ₹100 – ₹180 | $1.25 – $2.25 |
| 10 ft x 6 ft Gangsaw Slabs | 20 mm | ₹300 – ₹400 | $3.75 – $5 |
| 10 ft x 3.25 ft Cutter Slabs | 30 mm | ₹130 – ₹210 | $1.65 – $2.65 |
| 10 ft x 6 ft Gangsaw Slabs | 30 mm | ₹400 – ₹500 | $5 – $6.25 |
Best Designs Using Black Pearl Granite Countertops
These are some design concepts of Black Pearl in various styles:
- Contemporary Minimalist – White or grey cabinets with polished countertops and metal hardware.
- Industrial Loft – Brushed and concrete or metal-inspired cabinetry.
- Rustic Farmhouse – Leathered finish in warm wood colours and brass hardware.
- All‑Black Kitchen – Shiny counters and dark cabinets to achieve a moody, luxurious appearance.
- Outdoor Kitchen Oasis – Leathered countertops in outdoor spaces with stone pavers and tropical plants.
Summary
Cost in the U.S. (Material Only)
- Polished Finish: $35 to $55 per sq. ft
- Leathered Finish: $45 to $70 per sq. ft (includes the extra cost for finishing)
Countertop Installation Costs (U.S.)
- Typical Range: $2,500 to $5,000+
- Pricing depends on total square footage, edge profile, backsplash, cutouts (sink, cooktop), and finish type.
Finish Types Available
- Polished: Glossy, easy to maintain; great for traditional kitchens.
- Leathered: Matte, textured surface; ideal for modern, high-traffic areas.
- Honed, Brushed, and Antique finishes are also available for custom applications.
Notes
- Slab Thickness: Commonly 2 cm and 3 cm.
- Leathered slabs are often priced higher due to the extra labor and premium look.
- Great for: Kitchen countertops, bathroom vanities, commercial surfaces, outdoor kitchens.
Black Pearl Granite will be a favorite among homeowners and designers with its stylish and classic look, and functional flexibility. One can achieve either a clean polished look or a elegant leathered finish with this stone, either way it adds luxury and longevity to any room.
Feel free to get in touch for a free consultation, quote, and get a detailed understanding from our experts here at Petros®. Visit https://petrosstone.com/ or call +91-8446360361 and WhatsApp
Hello!
I’m Varsha, with a deep interest in architecture and years of content writing experience, I explore how natural stones like granite and marble shape beautiful, functional spaces. At Petros® Stone, I share insights that help readers appreciate the design potential and timeless appeal of stone.
Brown Granite
White Galaxy Granite
Blue Bahia Granite
Silver Cloud Granite
Black Pearl Granite
Dallas White Granite
